ESP POST INSULATOR

The post support insulator is used for supporting hanged frame of discharge electrodes and also for high-voltage insulation.

The post support insulator consists of porcelain body and metal accessories. These two parts are combined by Portland cementing or the thermal-resisting gluing. Elastic pad and buffer layer are used between the porcelain body and metal accessory to prevent loosening. It helps to guarantee the mechanical strengths.

Material:
 a, C795 (>95% Alumina, suit for working temperature <500℃);
 b, C610 (>55% Alumina, suit for working temperature <350℃);
 c, C130 (>45% Alumina, suit for working temperature <250℃);

 Production according to GB, IEC, IS etc.
 Working temperature: 150℃ to 500℃.
 The working voltage: 72kv to 110kv.
 Compressing withstand Load ≥ 500kN.
 Glazed brown RAL 8017 or grey ANSI 70.